If you’ve forgotten your password, pattern lock, or PIN, you’re not alone. It’s a common problem, and if you’re facing it with your Coolpad Legacy, you’re probably looking for a way to unlock your phone. But the question is, how do you Unlock Coolpad Legacy without losing data?
Using Google Questions is the easy one, others are a little bit tricky, one of the easy ways to use the Professional Android Data Recovery Tool (Dr. Fone). Besides, you will find multiple options to Unlock your Coolpad Legacy Android mobile.
Most processes will erase the data on your phone, but there are also methods to unlock without losing your personal data.
Quick Look About Coolpad Legacy
Here’s a quick look at the Coolpad Legacy specifications:
Released: Released 2019, May
Display: 6.36″ (1080×2160 pixels)
Android Version: Android 9.0
Camera: 16MP , Video: 1080p
Operating System: Android 9.0
Chipset: Snapdragon 450
RAM: 3 GB (MB for older models)
ROM: 32GB storage, microSDXC
Battery: Li-Po, 4000 mAh
Methods to Unlock Coolpad Legacy Password, Pattern, Forgot Password, FaceLock, Pin
Several ways are available to unlock Coolpad Legacy. Not all of them might not work on your device. Therefore, you can try one by one until you have unlocked your Coolpad Legacy smartphone.
You can use any of the following methods to unlock Coolpad Legacy without losing data:
- Using Gmail account
- Answering Google security questions
- Using SDK tool
- Using Android Data Recovery Tool (Dr. Fone)
You may not always be able to follow the methods above. Then what can you do? Well, when there is no other way to recover the data, you can follow the methods below to erase data and unlock Coolpad Legacy:
- Hard reset or Factory reset
- Google find my device
- Android multi-tool
Continue reading till the end to know how to apply the methods to unlock your Coolpad Legacy.
Unlock Coolpad Legacy Using Your Gmail Account
You can unlock your Coolpad Legacy using your Gmail account without losing data. The process is quite simple and it will take less than a minute.
Follow the steps below to Unlock Coolpad Legacy with your Gmail account:
Step 1: Ensure your smartphone is connected to WiFi or the internet.
Step 2: Try to enter any password, PIN, or pattern a few times.
Step 3: After a few failed attempts, you will see a “Forget Password” option. Select it to get the option to enter the info of your Gmail account.
Step 4: Enter information such as email and password that you have logged into on your Coolpad Legacy. Upon entering the correct information, your phone will be unlocked.
This is also quite an easy method where you will not lose any data, note that your email should be connected to your phone.
Unlock Coolpad Legacy by Answering Google Security Questions
If you have set any security questions in your Gmail account, you also can unlock Coolpad Legacy to answer those questions. Follow the simple steps below:
Step 1: Similar to the previous method, make some failed attempts to enter the password.
Step 2: This time, select the “answer security questions” option.
Step 3: Now, answer the questions you have set.
Step 4: If you answer correctly, your Coolpad Legacy will be unlocked.
However, most users normally forget their security questions answers. In that case, you can follow other methods.
Unlock Coolpad Legacy Using SDK Tool
If you have USB debugging enabled on your Coolpad Legacy, you can Unlock your smartphone with the SDK tool. It is an advanced technique, and you can perform it only if you know how to work with the ADB command prompt.
Follow the steps below to unlock Coolpad Legacy using the SDK tool:
Step 1: Download and install the SDK tool on your computer.
Step 2: Now connect your Coolpad Legacy with the computer using the original USB cable.
Step 3: Open the command prompt directory and type “ADB shell rm /data/system/gesture. the key” without quote and click Enter.
Step 4: Then restart your phone, and the lock screen should disappear.
This is a bit more developer style with is good for tech people, not all can do it properly.
Unlock Coolpad Legacy With Android Data Recovery Tool
One of the most efficient ways is to unlock your Coolpad Legacy is with an Android data recovery tool. You will not lose any data in this method.
Follow the steps below to Unlock Coolpad Legacy with the Android data recovery tool:
Step 1: Download and install Dr. Fone on your computer.
Step 2: After successfully installing the software, run it.
Step 3: Now, connect your smartphone with your computer using a USB cable. Try to use the original cable as others may not work well for unlocking.
Step 4: Dr. Fone will try to identify your smartphone model now.
Step 5: After recognizing the Coolpad Legacy, you will get some instructions on your computer screen.
Step 6: Follow the instructions carefully to unlock your Coolpad Legacy smartphone.
We recommend this method because it works pretty well, and you will not lose any data too.
All the methods explained above will result in no loss of data while unlocking the Coolpad Legacy. If you failed to unlock your smartphone with the methods due to any limitations, you can go for the methods below.
Below all Methods will delete all of your personal information, photos, and files from your device. This cannot be undone.
Unlock Coolpad Legacy by Hard Reset or Factory Reset
Factory reset is one of the oldest methods to unlock Android smartphones. The only drawback is that you will have to erase data from your Coolpad Legacy.
Follow the steps below to Unlock Coolpad Legacy by Hard Reset or Factory Reset:
Step 1: First, turn off your Coolpad Legacy.
Step 2: Now press the power & volume up button together and hold for a few seconds until the Coolpad logo shows up.
Step 3: Select the Factory Reset option and touch “Yes” to confirm. Use volume up and down for navigation and power button to select.
It will reset the phone, and then you will be able to use your phone without needing to enter the password. But again, all of your data will be lost.
Unlock Coolpad Legacy with Google Find My Device
You can use Google’s Find My Device service to unlock your Coolpad Legacy. This will also erase all the data on your smartphone.
The steps to unlock Coolpad Legacy with Google Find My Device is:
Step 1: Go to Google Find My Device from any computer or other phone and sign in with the Gmail id you have logged into your phone.
Step 2: Google will show your device name with a few options.
Step 3: Hit the “Erase” option, and it will erase all the data on your phone, including the password.
Now, you should be able to use your Coolpad Legacy without entering any password or PIN, or pattern.
Unlock Coolpad Legacy with Android Multi-tool
Using the Android Multi-tool is another method to unlock Coolpad Legacy by sacrificing the data on your device.
Follow the steps below to use Android Multi-tool to Unlock Coolpad Legacy:
Step 1: Download the Android Multi-tool on your computer and install it.
Step 2: Run the software and download any additional driver the tool may require for Coolpad Legacy.
Step 3: Turn off your phone and connect it to the computer via the original USB cable.
Step 4: Press the power and volume up button of your phone together to enter the Android boot menu.
Step 5: Launch the multi-tool software and follow the instructions on the screen to unlock your Coolpad Legacy.
These are the most efficient ways you can follow to unlock your Coolpad Legacy .
Tips to Avoid Losing Data in the Future in Case You Forget Your Password Again
Some of the methods will not delete your data, while others will. We know how tough it is to lose your important data. As the Coolpad Legacy has 32GB storage, microSDXC , you may have stored some important photos, videos, documents, or any other information.
In case you have to sacrifice the data this time, you can follow some precautions to ensure avoid repetition. Here are some tips to avoid losing data if you forget your password once again:
Tip 1: While selecting any password, PIN, or pattern, ensure it is easy to remember.
Tip 2: Also, find a way to remember your Gmail password so you can unlock your phone using the mail id and the password.
Tip 3: Set some easy-to-remember security questions on your Gmail account.
Tip 4: Enable USB debugging on your phone so that you can use the SDK tool to unlock it. To enable USB debugging, go to Settings>About Phone>Version and continuously tap on build number 7 to 8 times. It will enable the developer mode, which you will find on settings. Enable USB debugging from the developer mode.
Conclusion
We understand that it can be frustrating to forget your password, PIN, or pattern for your phone. However, you can easily Unlock your Coolpad Legacy by following any of the methods above. Be sure to follow the tips to avoid losing any data while recovering your phone.
